|
|||||
Alkalinity -
Among aquarists there seems to be some confusion about the Hardness
of the aquarium water. Most aquarists only consider one sort of hardness, the so-called
"soap hardness" or "total hardness" that may be found when shaking for example 40 ccm
of water with some soap solution (Boutron-Boudet) or 100 ccm with a more diluted soap
solution (Clark). This hardness might also be found using the Komplexon etc. In my
aquarium-keeping, I never found this sort of hardness to be of prior importance.
There is another sort of hardness, called Temporary Hardness or, better, Carbonate
Hardness that seems to be of much greater importance when keeping fish which are
said to like "soft water". By the analysis of soap hardness one finds the amount
of bicarbonate/carbonate ions present in the water. That is to say that these two
analyses give information about two different matters within the composition of the water.
You possibly know that the amount of salts from carbonic acid (carbonates and bicarbonates,
also called hydrocarbonates) present in the water normally governs the pH value
of the water. This is done by the so-called hydrolysis of salts of carbonic acid.
CaCO3 or calcium carbonate will split into ions if dissolved in water.
CaCO3 = Ca2+ plus CO3-- that is to say into one Ca2+ ion with 2 positive electrical
charges and one carbonate ion with 2 negative charges. The carbonate ion however
is able to stay in water in that form. It acts with water (the hydrogen ions of
the water) in this way:
CO3-- plus H2O = HCO3- plus OH-.
That is to say that the carbonate ion "steals" a hydrogen ion and in
that way one hydroxyl ion is left in the water. This makes water alkaline or,
in other words, the pH of the water increases. The carbonate ion is converted
into a bicarbonate ion. This however cannot stay in water in that form, it has
to undergo one more metamorphosis:
HCO3- plus H2O = H2CO3 plus OH-
The bicarbonate ion steals another hydrogen ion from the water and converts
itself into common carbonic acid. One hydroxyl ion is left in the water, making
this even more alkaline.
These reactions take place because carbonic acid is a weak acid. A weak acid will
not freely split itself into ions when dissolved into water. Only very few of
the acid molecules will separate into ions. Therefore carbonate and bicarbonate
ions (independently where they come from) will have to establish the natural balance
between complete acid molecules, carbonate, and bicarbonate ions. The presence of
calcium ions has nothing to do with this reaction. It is only a question of how
much carbonate you add to the water. The more carbonate added, the more the pH
of the water will increase!!! The presence of carbon dioxide in water (carbon dioxide,
not supplies to the water from salts of carbonic acid) acts as if carbonic acid
is present and thereby forces the balance into a less alkaline water or a lower
pH value. Ion exhange materials (permutit, natrolit, etc.) that decrease the soap
hardness to zero will not interfere with the balance between carbonic acid and
its salts. The pH of the water (generally) will not change. Using these common
"water improvers" only changes "lime" into "soda".
The analysis:
Take 100 ccm (1/10 liter) of the water to be analyzed. Place this amount of water
into a white cup (clean) or a cylindric glass placed on a white support. Add as
many drops of 0.1% methyl orange (or perhaps even better the "screened MO indicator"
(The British Drug House Ltd. CN 2075.B.D.H. "3046" indicator)) as you clearly
see the orange yellow coloring of the water. Fill your "hardness burette" (or
other test tube) with 0.1 normal hydrochloric acid (0.1 n HCl), a titration acid
to be bought at your drug house. Add this acid to the water sample drop by drop.
Stir the sample gently. When the color changes from orange yellow to orange red
the analysis is over. If you used the common test tube for "soap hardness", one
degree of hardness read on the tube equals 1/10 ccm. As one degree of alkalinity
(SBV-Wert) is 1 ccm 0.1 n HCl per 100 ccm water sample, you just read the degree
of "hardness" on your test tube and divide it by 10.
Let us say that you used an amount of acid equal to 12 "degrees of hardness",
measured on the test tube, your Alk value is 1.2 (you used 1.2 ccm of acid).
The temporary hardness you now find my multiplying this value by 2.8: 2.8 x 1.2 = 3.6
German degrees of temporary hardness (see also pages before).
Theory of the analysis:
Hydrochloric acid is a very strong acid. If added to a water sample that holds
salts of carbonic acid, the hydrochloric acid will "force" the salts into chlorides
(force the bicarbonate and carbonate into carbonic acid). The carbonic acid however
is not able to decrease the pH value of the water down to the value by which the
methylorange changes its color (about pH 3.6). Therefore, the methylorange does
not change its color before there is free hydrochloric acid present in the water,
and that means that all salts of carbonic acid are transformed into chlorides
(these are salts of hydrochloric acid).
However, during the analysis one used too much acid because one forced
the pH down to the 3.6 value. In order to be correct, one should subtract 0.065
from the value of alkalinity found. Only when measuring very soft water, this
is of practical importance.
Temporary hardness of natural waters (expressed as German degrees of hardness):
South America:
Copyright 2022 Richard J. Sexton |